Utilizing a series of sensors located where water leaks are most likely to occur, the WaterCop Pro system offers advanced leak detection and automatic water shut-off technology that’s so advanced, it actually stops damage before it starts. Plus, the actuator provides this unmatched protection 24/7, even when you’re away from home, for complete peace-of-mind.
Additional Product Information
The WaterCop Pro System adds valuable features like an improved user interface and ﬂexible installation options. WaterCop Pro is customizable to work with any plumbing set-up and is ideal for custom-built or expensive homes, multi-family, condominium or commercial use where combinations of hardwired and wireless sensors communicate with an indoor shut-off valve. WaterCop Pro provides the most complete plumbing leak protection while offering the most ﬂexible installation options and third party monitoring/security integration.
The WaterCop Pro System is customizable to fit any plumbing configuration.
- Control panel with visual system status
- Simple user controls
- Standard security/home automation systems integration
- Flexible wiring, mounting and installation options
- External manual override and audible alarm
- Fully supervised, addressable low-proﬁle wireless flood sensors
- Up to 8 (optional) hardwired sensors
- Valves available in ½”, ¾”, 1″, 1 ¼”; large valves available in 1½” and 4″
- Inquire for sizes larger than 4”
When water contacts a sensor, a wireless signal is sent to the WaterCop shut-off valve installed on the main water supply to close and stop the flow of water to the leak point.
Range Enhancing Repeater
Increases the effective range of wireless flood and temperature sensors by retransmitting the wireless signal from any WaterCop sensor to the WaterCop valve.
Leak and Low Temperature Sensor
Helps reduce the chance of frozen water pipes and plumbing leaks that may occur with low temperatures.
Leak and Hi/Low Temperature Sensor
Helps reduce the chance of frozen water pipes, plumbing leaks, and excessive moisture damage that may occur with sudden and extreme temperature changes.
WaterCop wireless sensor power adaptors allow sensors to operate on 110VAC power.
Valve/Switch Interconnect Cable (50ft. & 100ft.)
Allows you to connect the WaterCop control valve to the RS100 water control wall switch.
Sensor Cord and Probe
Leak sensor cord with probe used for WaterCop Pro hard-wired and wireless sensors.
12VDC Power Supply
WaterCop power supply allows for adding devices and provides power to a 12VDC relay coil.
Indoor/outdoor cable for WaterCop Pro Large Valve 1 ½” and 2″
12 VDC Relay Kit
WaterCop pre-wired relay connects Pro control panel to 120 VAC large valve actuator and provides actuator power.
Additional Product Lines
WaterCop Classic Designed for a typical single-family home or vacation residence and offers thorough plumbing leak protection.
WaterCop Z-Wave Integrates with smart home technology for remote control of the main water supply valve.
WaterCop LeakStop Single point leak detection and automatic shut-off system.
Take the next step.
To find your nearest authorized dealer to quote, install, and service your new WaterCop system for your home,
How can we help you?
To learn more about how WaterCop detects and automatically stops plumbing leaks in your home, contact us today.